World Library  
Flag as Inappropriate
Email this Article

Windlass

Article Id: WHEBN0000239807
Reproduction Date:

Title: Windlass  
Author: World Heritage Encyclopedia
Language: English
Subject: List of Chinese inventions, Erasmus of Formia, Crossbow, Crane (machine), Agostino Ramelli
Collection: Mechanisms (Engineering), Sailing Rigs and Rigging
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Windlass

For the tool used to raise paddle gear on canal locks, see Windlass ("lock key")
Turnbridge Windlass Lift road bridge over Huddersfield Broad Canal
Differential windlass

The windlass is an apparatus for moving heavy weights. Typically, a windlass consists of a horizontal cylinder (barrel), which is rotated by the turn of a crank or belt. A winch is affixed to one or both ends, and a cable or rope is wound around the winch, pulling a weight attached to the opposite end.

Contents

  • Uses 1
  • Differential windlass 2
  • See also 3
  • References 4
  • External links 5

Uses

  • 'Vitruvius, a military engineer writing about 28 B.C., defined a machine as "a combination of timber fastened together, chiefly efficacious in moving great weights." About a century later, Hero of Alexandria summarized the practice of his day by naming the "five simple machines" for "moving a given weight by a given force" as the lever, windlass, screw for power, wedge, and tackle block (pulley). Until the nearly the end of the nineteenth century it was held that these "five mechanical powers" were the building blocks from which all more complex assemblages were constructed.' [1]
  • By the Late Middle Ages most European crossbows employed a windlass as a cocking mechanism, which helped to pull heavier crossbows, but were used in England as early as 1215.[3]
  • The rod or stick used to tighten a tourniquet in surgical procedures is called a windlass.
  • Windlass can be used to raise water from a well. The oldest description of a well windlass, a rotating wooden rod installed across the mouth of a well, is found in Isidore of Seville's (c. 560–636) Origenes (XX, 15, 1-3).[4]
  • Windlass have also been used in gold mining. A windlass would be constructed above a shaft which allowed heavy buckets to be hauled up to the surface.[5] This process would be used until the shaft got below 40 metres deep when the windlass would be replaced by a 'whip' or a 'whim'.[6]

Differential windlass

Comparison of a differential pulley or chain hoist (left) and a differential windlass or Chinese windlass (right). The rope of the windlass is depicted as spirals for clarity, but is more likely helices with axes perpendicular to the image.

In a differential windlass, also called a Chinese windlass,[7][8][9] there are two coaxial drums of different radii r and r‍ '​. The rope is wound onto one drum while it unwinds from the other, with a movable pulley hanging in the bight between the drums. Since each turn of the crank raises the pulley and attached weight by only \pi(r - r'), very large mechanical advantages can be obtained.

See also

References

  1. ^ "Kinematic Synthesis of linkages". 
  2. ^ "Medieval Builders' Windlass". http://www.bbc.co.uk. Retrieved September 11, 2012. 
  3. ^ "Engineering the Medieval Achievement-The Crossbow". http://web.mit.edu. Retrieved September 11, 2012. 
  4. ^  
  5. ^ "Albert Goldfields Mining Heritage" (PDF). http://outbacknsw.com.au. Retrieved September 11, 2012. 
  6. ^ "Searching for Gold". http://www.kidcyber.com.au. Retrieved September 11, 2012. 
  7. ^ "Chinese".   (Subscription or UK public library membership required.) ()
  8. ^ Morris, Christopher, ed. (1992), Academic Press Dictionary of Science and Technology, Gulf Professional Publishing, p. 416,  
  9. ^ Knight, Edward H. (1884), The Practical Dictionary of Mechanics,   "Chinese-windlass, a differential windlass in which the cord winds off one part of the barrel and on to the other."

External links

  • Spanish Windlass
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 



Copyright © World Library Foundation. All rights reserved. eBooks from World Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.