World Library  
Flag as Inappropriate
Email this Article

Pressure Equipment Directive

 

Pressure Equipment Directive

The Pressure Equipment Directive 97/23/EC (PED) [1] of the EU sets out the standards for the design and fabrication of pressure equipment ("pressure equipment" means steam boilers, pressure vessels, piping, safety valves and other components and assemblies subject to pressure loading) generally over one litre in volume and having a maximum pressure more than 0.5 bar gauge. It also sets the administrative procedures requirements for the "conformity assessment" of pressure equipment, for the free placing on the European market without local legislative barriers. It has been mandatory throughout the EU since 30 May 2002. This is enacted in the UK as the Pressure Equipment Regulations (PER). The set out standards and regulations regarding pressure vessels and boilers safety is also very close to the US standards defined by the American Society of Mechanical Engineers (ASME). This enables most international inspection agencies to provide both verification and certification services to assess compliance to the different pressure equipment directives.[2]

Contents

  • Contents 1
  • See also 2
  • References 3
  • External links 4

Contents

  1. Scope and Definitions (including exemptions of its scope)
  2. Market surveillance
  3. Technical requirements: classification of pressure equipment according to type and content.
  4. Free movement
  5. Presumption of conformity
  6. Committee on technical standards and regulations
  7. Committee on Pressure Equipment
  8. Safeguard clause
  9. Classification of pressure equipment
  10. Conformity assessment
  11. European approval for materials
  12. Notified bodies
  13. Recognized third-party organizations
  14. User inspectorates
  15. CE marking
  16. Unduly affixed CE marking
  17. International cooperation
  18. Decisions entailing refusal or restriction
  19. Repeal
  20. Transposition and transitional provisions
  21. Addressees of the Directive: the EU member states for implementation in national laws and/or regulations.
  • Annex I: Essential safety requirements
  • General
  • Design
  • Manufacturing
  • Materials
  • Fired or otherwise heated pressure equipment with a risk of overheating (article 3.1)
  • Piping
  • Specific quantitative requirements for certain pressure equipment
  • Appendix II: Conformity assessment tables. Actually diagrams of pressure vs. volume (or diameter for pipes), for classification of equipment in four classes.
  • Appendix III: Conformity assessment procedures
  • Appendix IV: Minimum criteria to be met when designating the notified bodies (article 12) and the recognized third party organizations (article 13)
  • Appendix V: Criteria to be met when authorizing user inspectorates (article 14)
  • Appendix VI: CE marking
  • Appendix VII: Declaration of conformity

See also

References

  1. ^ European Commission Pressure Equipment Directive (PED): overview
  2. ^ Boiler and Pressure Vessel Inspection According to ASME

External links

  • PED / Pressure Equipment Directive homepage
  • Pressure Equipment Directive 97/23/EC categorization software
  • Pressure Equipment Directive (PED) Overview
  • Essential links for CE Marking in the UK


This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 



Copyright © World Library Foundation. All rights reserved. eBooks from World Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.