World Library  
Flag as Inappropriate
Email this Article

Hutt Valley Line

     Hutt Valley Line
Ganz-Mavag EM 1367 leading a southbound 4-car set, near Epuni on the Hutt Valley Line.
Type commuter rail
System Metlink
Status Open, passenger and freight
Locale Hutt Valley, New Zealand
Termini Wellington
Upper Hutt
Stations 18
Ridership 4,976,000 per annum (2011-12)[1]
Owner KiwiRail Network
Operator(s) Tranz Metro
Character Urban
Rolling stock EM/ET EMUs
FP/FT class EMUs
Line length 32.4 km (20.1 mi)
Track gauge 1,067 mm (3 ft 6 in)
Electrification 1600 V DC overhead
Route number HVL

The Hutt Valley Line is the marketing name of the electrified train service operated by Tranz Metro on behalf of Metlink on the section of the Wairarapa Line railway between Wellington and Upper Hutt.


  • Construction 1
  • Hutt Valley Branch 2
  • Extension and electrification 3
  • Operation 4
    • Passenger services 4.1
    • Freight services 4.2
  • Future 5
  • Stations from Wellington to Upper Hutt 6
  • See also 7
  • References 8
  • Further reading 9
  • External links 10


The Hutt Valley line was the first railway out of Wellington, preceding the Wellington and Manawatu Railway Company's west coast route, which was later acquired by the New Zealand Government Railways and incorporated into the North Island Main Trunk. The first proposal for a railway line from Wellington to the Rimutaka ranges was put to the Wellington provincial government by Robert Stokes in 1858, and five years later the government gave support to the idea. In 1866, the government's investigating committee approved the line and the Wellington, Hutt Valley and Wairarapa Railway Ordinance was passed on 2 July 1866. It authorised a line to be built to either gauge of 1,435 mm (4 ft 8 12 in) standard gauge, or a narrow gauge of 3 ft 6 in (1,067 mm), but sufficient funds could not be raised in England and the railway proposal was temporarily abandoned.[2]

In 1870, Premier Julius Vogel included a railway from Wellington to the Wairarapa in his "Great Public Works" policy, and while in London to raise funds for a number of projects in this policy, he was approached by contractors Brogden & Sons. They received a contract to survey and construct the first portion of the line, from Wellington to Lower Hutt, and construction began on 20 August 1872, with the first sod turned at Pipitea in Wellington. The railway took longer to construct due to the difficulties associated with stabilising the shoreline of Wellington Harbour. In July 1873, the railway reached Kaiwharawhara, followed by Ngauranga in early 1874 and Lower Hutt on 14 April 1874. Steam locomotives had now arrived to work the line and a service began, with four trains daily each way (three on Sundays).[2]

Construction of the next section to Upper Hutt along the western bank of the Hutt River proceeded swiftly. On 11 May 1874, a contract was let to Charles McKirdy,[3] and the line was opened to Silverstream in December 1875; this included a 272-metre bridge across the Hutt River just before Silverstream, and in other locations thousands of bags of cement had to be used to stabilise the railway's route alongside the river. The line opened to Upper Hutt on 1 February 1876.[2] Kaitoke was reached on 1 January 1878, followed by the first section into the Wairarapa on 12 August 1878 to Featherston.[4] This section descended the Rimutaka ranges via the Rimutaka Incline.

The Pipitea Point Railway Station terminus in Wellington was destroyed by fire on 16 January 1878, but remained open. A permanent replacement further south on Featherston Street opened on 1 November 1880; it was moved northwards to near the intersection of Thorndon and Lambton Quays in 1885 and later became known as Lambton Railway Station. It was replaced by the present Wellington Railway Station on Bunny Street in 1937.

The route alongside the harbour from Wellington to Lower Hutt was straightened and duplicated. The work was approved in 1903 by the Hutt Railway and Road Improvement Act, and began in 1904. From Lower Hutt it was completed to Petone (1905), Rocky Point (1906), Paparangi Point (1907), Ngauranga (1908), Kaiwharawhara (1909), and Wellington in 1911.[2][5][6]

In the 1900s a number of new stations and sidings were added: Trentham in 1907; Melling, Gosse and Co’s siding, Pitcaithly's (station and siding), Belmont Quarry Co’s siding (not to be confused with the Belmont Railway Station), Silverstream Bridge and Heretaunga in 1908.

Hutt Valley Branch

The original route was built along the western bank of the Hutt River to provide the most direct route from Wellington to the Wairarapa. In 1925, the Hutt Valley Lands Settlement Act contained a provision for a branch line railway from Petone to Waterloo.,[7] known as the Hutt Valley or Waterloo Branch. Initially a single line was planned, but as a substantial 233 metre bridge with 17 piers over the Hutt River at Ava was needed, and as it was to be the future main line as the Western Hutt route could not be duplicated north of Melling, the new line was double track. It was built by the Public Works Department, and work started in April 1925, before the first sod had been turned by the Prime Minister Gordon Coates on 16 April 1925.[8] Construction was simple with minimal earthworks, although industrial troubles in Britain delayed delivery of steel girders, and the temporary structure was nearly washed away by a flood. Three new stations at Ava, Woburn and Waterloo were built. The new line was opened by Coates, on 26 May 1927.[9]

The Hutt Valley Branch was soon followed by the Gracefield Branch to the Railway Department's new Hutt Workshops on 1 April 1929.[5]

Extension and electrification

After World War II, the Hutt Valley experienced significant population growth, especially with the establishment of state housing communities in Naenae and Taita, and extension of the Hutt Valley Branch to serve those two neighbourhoods was approved. Already built to Waterloo as double track, the next section to Naenae opened on 7 January 1946 initially as single track. On 14 April 1947 the line to Taita opened, and the section from Waterloo to Naenae double tracked. The section from Naenae to Taita was duplicated on 22 February 1953. A proposal to extend the Taita line to link up with the original Hutt Valley main line had been approved in February 1946, and in the early 1950s this was carried out. On 28 February 1954, the section of the old main line between Melling and Haywards (now Manor Park) closed, leaving the Lower Hutt to Melling section as the Melling Branch. The following day, the new Taita to Haywards section opened and the Hutt Valley Branch was incorporated into the Wairarapa Line. Initially single track, the section was duplicated on 19 July 1954.[10]

Electrification had been approved in response to post-WWII coal shortages and was also implemented in the 1950s, with the first electrified section opened on 14 September 1953 from the North Island Main Trunk junction at Kaiwharawhara to Taita. The old bridge over the Hutt River to Silverstream was found unsuitable for electrification and a deviation was built to the north over a new bridge. A direct line from Taita to Silverstream through the Taita Gorge with a tunnel had been proposed, eliminating the route across the river to Haywards and then back over at Silverstream, but the soil through the gorge was found unsuitable, and two bridges were built instead.[5] Some of the original line replaced by the new route to Silverstream has been preserved by the Silver Stream Railway.

On 19 July 1954, the railway was duplicated to a point north of Haywards, and on 21 November a single track on the new Silverstream deviation was brought into use. Duplication from Haywards was completed to Trentham on 26 June 1955. On 24 July the electrification was completed to Upper Hutt and diesel-hauled suburban passenger trains north of Taita ceased.[11]

On 3 November 1955 the Rimutaka Incline was replaced by the Rimutaka Tunnel, speeding travel from the Hutt Valley to the Wairarapa. This involved re-routing the Wairarapa Line north of Upper Hutt. The Kaitoke route via Kaitoke and Summit in the Rimutaka Ranges at the western end of the incline was closed and replaced by a line through Maymorn to the tunnel.

Seven traction substations along the line take electricity from Wellington Electricity's 11,000-volt distribution network and transform and rectify it to 1500-volt direct current for the overhead traction lines. The substations are located at Wellington, Kaiwharawhara, Petone, Woburn, Pomare, Silverstream, and Upper Hutt. There is also some supply from the Lower Hutt traction sub-station on the Melling line. Also along the line are three "cross-tie" substations at Rocky Point, Epuni, and Heretaunga, which provide a switching function but don't have transformers or rectifiers.


In June 2013 the Hutt Valley line was cut on the evening of 20 June between Ngauranga and Petone by scour beneath the line in several places during the storm of 20–21 June. Hutt Valley and Wairarapa lines services between Petone and Wellington were replaced by buses. KiwiRail had to rail in more than 1400 cubic metres of fill. [12] [13] [14] Service was restored on the morning of 27 June. [15] [16] [17] [18]

Kaiwharawhara Station was closed suddenly in June 2013 as it was discovered how badly corroded the overbridge was. In November 2013, the GWRC voted to close it permanently as on health and safety grounds, it was too expensive and nearly impossible to upgrade the station to provide step free access via ramps for disabled passengers.

Passenger services

C, D, and L class steam locomotives operated the original route in the 1870s and 1880s.[19] In 1905, D 137 was utilised in trials on the Hutt Valley Line of a "railcar" service between Lower and Upper Hutt[20] based on a concept the Railways Department's General Manager had witnessed in the eastern United States. This involved D 137 hauling a carriage that seated 24 first class passengers and 48 second class passengers, and had a guard's compartment. However, it proved uneconomic and grossly over-powered, and accordingly, it was soon taken out of service and the Railways Department pursued research into genuine railcars, culminating in various classes covered by the general RM class designation.[21]

On 11 December 1897, the Wairarapa Line was completed to its junction with the Palmerston North - Gisborne Line at Woodville, allowing the commencement of the Napier Express from Wellington through the Hutt Valley and Wairarapa to Napier in the Hawkes Bay. This provided the premier service on the Hutt Valley Line until early 1909, when it was re-routed via the west coast route that the Railways Department had recently acquired from the Wellington and Manawatu Railway Company.[22] Its replacement was the Wairarapa Mail, an express train that ran the Napier Express's former Wellington-to-Woodville leg. Through the Hutt Valley, the express was typically hauled by WW class tank locomotives.[23] In 1936, the Wairarapa railcars started doing the Wairarapa runs, decreasing the frequency of the express and ultimately leading to its cancellation in 1948. No named provincial express has operated on the Wairarapa Line since this time.[24]

In the 20th century prior to electrification WAB and WW class tank locomotives typically hauled suburban trains. Prior to full electrification, services beyond Taita were hauled by DE class diesels. Full electrification saw duties shared between DM/D class "English Electric multiple units and carriage trains hauled by ED and EW class electric locomotives, the latter class ordered for the Wellington electrified network when the Hutt Valley electrification project was approved. The EDs were withdrawn by 1980 and EWs by 1983.

In 1982-83 the EM/ET "Ganz Mavag" multiple units were introduced, taking over most services, so that the DM/D multiple units used on the line since 1953 were used only at peak times.[5] The introduction of the FP/FT "Matangi" class EMUs from 2011 provided extra passenger capacity, and enabled the remaining DM/D class EMUs to be withdrawn in 2012.

As of 2013 Metlink commuter services, operated by Tranz Metro, run frequently along the line with stops at 18 stations.[25] Off-peak services run half-hourly during the day and hourly during the early morning and late evening, stopping at all stations. At peak times, two services run along the line every 20 minutes: the first starting at Upper Hutt and stopping at all stations to Taita, then running express to Wellington stopping only at Waterloo; the second starting from Taita and stopping at all stations to Petone, then running express to Wellington (only Melling Line trains serve Ngauranga during peak).

Kaiwharawhara Station was closed suddenly in June 2013 as it was discovered how badly corroded the overbridge was. In November 2013, the GWRC voted to close it permanently as on health and safety grounds, it was too expensive and nearly impossible to upgrade the station to provide step free access via ramps for disabled passengers.

Metlink commuter trains running to and from Masterton in the Wairarapa - the Wairarapa Connection - augment the Hutt Valley Line service. They operate several times daily, hauled mainly by DC class locomotives.

Freight services

From December 1897 until the acquisition of the WMR in December 1908, the Wairarapa Line was part of the Railways Department's primary route out of Wellington. Once the west coast route of the North Island Main Trunk Railway was available, all freight that could be diverted was sent via that line due to the costs and inefficiency of sending it over the Rimutaka Incline. Accordingly, the Wairarapa Line declined markedly as a freight route, though it became more desirable as a secondary route to the NIMT once the Incline was replaced by the Rimutaka Tunnel in 1955. Today, KiwiRail freight trains operate through the Hutt Valley between Wellington, Masterton, and Napier. Non-revenue services are also operated regularly to transfer equipment to and from the Hutt Workshops. Since the demise of the ED and EW class, all freight trains have been operated by diesel locomotives.[5]


In 2003, the Greater Wellington Regional Council proposed extending double-track from Trentham to Upper Hutt and extending electrification north of Upper Hutt to Timberlea and Cruickshank Road.[26] The 2011 – 2012 Regional Rail Plan (RRP) looks to start duplication work between Trentham and Upper Hutt in 2012.[27] Double-tracking of the Trentham – Upper Hutt section was confirmed by GWRC in June 2014 with the adoption of the regional public transport plan.[28]

In 2012 the Greater Wellington Regional Council decided to investigate extension of the electrification with Matangi trains north of Upper Hutt to a new station at Timberlea and north of Waikanae to Otaki (estimated cost $30 million for the Otaki project).[29]

Stations from Wellington to Upper Hutt

Name Code km Services
Wellington WELL 0.0 O U T M W
Ngauranga NGAU 4.8 O M
Petone PETO 10.5 O T M W
Ava AVA 12.5 O T
Woburn WOBU 14.4 O T
Hutt Central Waterloo Interchange WATE 15.5 O U T W
Epuni EPUN 16.5 O T
Naenae NAEN 18.3 O T
Wingate WING 19.5 O T
Taita TAIT 20.6 O U T
Pomare POMA 22.0 O U
Manor Park MANO 23.7 O U
Silverstream SILV 26.8 O U
Heretaunga HERE 28.2 O U
Trentham TREN 29.4 O U
Wallaceville WALL 31.3 O U
Upper Hutt UPPE 32.4 O U W

See also


  1. ^ "Wellington Metropolitan Rail 2011/12 Annual Report". Greater Wellington Regional Council. 30 June 2012. Retrieved 23 March 2013. 
  2. ^ a b c d Geoffrey B. Churchman and Tony Hurst, The Railways of New Zealand: A Journey Through History (Auckland: HarperCollins, 1991), pg. 151.
  3. ^ David Leitch and Brian Scott, Exploring New Zealand's Ghost Railways, rev. ed. (Wellington: Grantham House, 1998), pg. 42.
  4. ^ Leitch and Scott, Ghost Railways, pg. 39.
  5. ^ a b c d e Churchman and Hurst, The Railways of New Zealand, pg. 154.
  6. ^ Hoy, D.G. Rails out of the Capital (NZRLS, 1970) p. 47
  7. ^ Hutt Valley Lands Settlement Act 1925
  8. ^ Evening Post (Wellington), 1925: 17 April p5
  9. ^ Hoy, D.G. Rails out of the Capital (NZRLS, 1970] pp. 53,54
  10. ^ Valley Signals - Hutt Valley Timeline
  11. ^ Valley Signals - Hutt Valley Timeline
  12. ^ "Hutt Valley traffic grinds to standstill". Stuff/Fairfax. 24 June 2013. Retrieved 24 June 2013. 
  13. ^ "Commuters warned of disruption". Stuff/Fairfax. 24 June 2013. Retrieved 24 June 2013. 
  14. ^ "Commuter patience needed".  
  15. ^ "Resumption of normal train services great news". Metlink. Retrieved 6 July 2013. 
  16. ^ "Hutt Valley and Wairarapa lines to reopen". Kiwirail. Retrieved 6 July 2013. 
  17. ^ "Rail lines could be restored by Thursday". Stuff;Fairfax. Retrieved 6 July 2013. 
  18. ^ "Wellington train services back on track". TVNZ. Retrieved 16 August 2012. 
  19. ^ name=ChurchmanHurst151
  20. ^ David Jones, Where Railcars Roamed (Wellington: Wellington Tramway Museum, 1999), pg. 4.
  21. ^ D. B. Leitch, Railways of New Zealand (Melbourne: Lothian Publishing, 1972), pg. 192.
  22. ^ J. D. Mahoney, Kings of the Iron Road: Steam Passenger Trains of New Zealand (Palmerston North: Dunmore Press, 1982), pg. 51.
  23. ^ Mahoney, Kings of the Iron Road, pg. 81.
  24. ^ Mahoney, Kings of the Iron Road, pg. 83.
  25. ^ Tranz Metro, [1]
  26. ^ "Hutt Corridor Plan Ngauranga to Upper Hutt".  
  27. ^ "Regional Rail Plan".  
  28. ^ FORBES, MICHAEL (27 June 2014). "Date set for trolleys' exit". The Dominion Post (Wellington: Fairfax New Zealand). Retrieved 27 June 2014. 
  29. ^ Forbes, Michael (24 November 2012). "Electric extension for trains". The Dominion Post (Wellington). p. A2. 

Further reading

  • Hermann, Bruce J; North Island Branch Lines p 68 (2007, New Zealand Railway & Locomotive Society, Wellington) ISBN 978-0-908573-83-7

External links

  • Photo of train by harbour and signals c1928
  • Photo of new Hutt bridge c1927

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from World Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.