World Library  
Flag as Inappropriate
Email this Article

Hamilton-class cutter

 

Hamilton-class cutter

USCG photo of USCGC Hamilton (WHEC-715)
USCGC Hamilton (WHEC-715), the lead ship of the Hamilton class
Class overview
Name: Hamilton
Builders: Avondale Shipyards
Operators:
In commission: 1965 - present
Building: 0
Planned: 12
Completed: 12
Active: 6 US
Lost: 0
Preserved: 0
General characteristics
Type: High Endurance Cutter
Displacement: 3,250 metric tons
Length: 378 ft (115 m)
Beam: 43 ft (13 m)
Draft: 15 ft (4.6 m)
Propulsion:
Speed: 29 kn (54 km/h)
Range: 14,000 nmi (26,000 km)
Endurance: 45 days
Complement: 167
Armament: Otobreda 76 mm cannon, 2 × 25 mm Mk38, 20 mm Phalanx CIWS (Close In Weapons System) 6x .50 caliber machine guns
Aircraft carried: HH-60 J Hawk, HH-65 Dolphin go ship to ship as needed
Aviation facilities: hangar
USCGC Rush (WHEC-723), circa 1985, with the older 5"/38 gun, lacking radar and Phalanx CIWS upgrades.

The Hamilton class cutter was the largest class of vessel in the United States Coast Guard until replaced by the National Security Cutter, aside from the Polar Ice Breakers. The hull classification symbol is prefixed WHEC. The cutters are called "Hamilton class" after their lead ship, or "Secretary class" because most of them were named for former Secretaries of the Treasury (with the exception of "Hero Class cutters" Jarvis, Munro and Midgett,). They are powered by a CODOG (Combined Diesel or Gas) system consisting of two diesel engines and two gas turbines, and have controllable-pitch propellers. Equipped with a helicopter flight deck, retractable hangar, and the facilities to support helicopter deployment, these 12 cutters were introduced to the Coast Guard inventory in the 1960s. Beginning in the 1980s and ending in 1992, the entire class was modernized through the Fleet Rehabilitation and Modernization (FRAM) program. The program included the replacement of the original Mk30 Mod0 5 inch (127 mm)/38 caliber gun with a much more modern 76 mm (3 inch)/62 caliber weapon. The refit also included the installation of a Phalanx CIWS 20mm gun mount, and a retractable hangar bay. The primary mission of these vessels is enforcement of laws and treaties and search and rescue (SAR) on the high seas, including the U.S. exclusive economic zone.

Contents

  • Hamilton Class High Endurance Cutters by homeport 1
  • Operators 2
  • See also 3
  • References 4

Hamilton Class High Endurance Cutters by homeport

Kodiak, Alaska:

San Diego, California:

Honolulu, Hawaii:

Charleston, South Carolina:

Seattle, Washington:

Operators

See also

References

  1. ^ http://www.defensemedianetwork.com/stories/former-coast-guard-cutter-jarvis-transferred-to-growing-bangladesh-navy/
  2. ^ ‘Somudra Avijan’ handed over to Bangladesh Navy
  3. ^ http://www.abs-cbnnews.com/nation/05/06/12/next-navy-ship-be-named-after-corregidor-hero
  4. ^ http://www.defenceweb.co.za/index.php?option=com_content&view=article&id=34581:nigeria-receives-ex-us-coast-guard-cutter-gallatin&catid=51:Sea&Itemid=106
  • 378-foot (115 m) High Endurance Cutter Fact Sheet
  • GlobalSecurity.org overview
  • Next Navy ship to be named after Corregidor hero
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 



Copyright © World Library Foundation. All rights reserved. eBooks from World Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.