World Library  
Flag as Inappropriate
Email this Article

Flash (photography)


Flash (photography)

The high-speed wing action of a hummingbird hawk-moth is frozen by flash. The flash has given the foreground more illumination than the background. See Inverse-square law.
Video demonstration of high speed flash photography.

A flash is a device used in photography producing a flash of artificial light (typically 1/1000 to 1/200 of a second) at a color temperature of about 5500 K to help illuminate a scene. A major purpose of a flash is to illuminate a dark scene. Other uses are capturing quickly moving objects or changing the quality of light. Flash refers either to the flash of light itself or to the electronic flash unit discharging the light. Most current flash units are electronic, having evolved from single-use flashbulbs and flammable powders. Modern cameras often activate flash units automatically.

Flash units are commonly built directly into a camera. Some cameras allow separate flash units to be mounted via a standardized "accessory mount" bracket (a hot shoe). In professional studio equipment, flashes may be large, standalone units, or studio strobes, powered by special battery packs or connected to mains power. They are either synchronized with the camera using a flash synchronization cable or radio signal, or are light-triggered, meaning that only one flash unit needs to be synchronized with the camera, and in turn triggers the other units, called slaves.


  • Types of flash 1
    • Flash-lamp 1.1
    • Flashbulbs 1.2
      • Flashcubes, Magicubes and Flipflash 1.2.1
    • Electronic flash 1.3
    • High speed flash 1.4
    • Multi-flash 1.5
    • Flash intensity 1.6
    • Flash duration 1.7
    • Flash LED used in phones 1.8
    • Focal-plane-shutter synchronization 1.9
  • Technique 2
  • Drawbacks 3
  • Gallery 4
  • See also 5
  • References 6
  • External links 7

Types of flash


1909 flash-lamp
1903 view camera
Ernst Leitz Wetzlar flash from 1950's

Studies of magnesium by Bunsen and Roscoe in 1859 showed that burning this metal produced a light with similar qualities to daylight. The potential application to photography inspired Edward Sonstadt to investigate methods of manufacturing magnesium so that it would burn reliably for this use. He applied for patents in 1862 and by 1864 had started the Manchester Magnesium Company with Edward Mellor. With the help of engineer William Mather, who was also a director of the company, they produced flat magnesium ribbon, which was said to burn more consistently and completely so giving better illumination than round wire. It also had the benefit of being a simpler and cheaper process than making round wire.[1] Mather was also credited with the invention of a holder for the ribbon, which formed a lamp to burn it in.[2] A variety of magnesium ribbon holders were produced by other manufacturers, such as the Pistol Flashmeter, which incorporated an inscribed ruler that allowed the photographer to use the correct length of ribbon for the exposure they needed. The packaging also implies that the magnesium ribbon was not necessarily broken off before being ignited.

An alternative to ribbon was flash powder, a mixture of magnesium powder and potassium chlorate, introduced by its German inventors Adolf Miethe and Johannes Gaedicke in 1887. A measured amount was put into a pan or trough and ignited by hand, producing a brief brilliant flash of light, along with the smoke and noise that might be expected from such an explosive event. This could be a life-threatening activity, especially if the flash powder was damp.[3] An electrically triggered flash lamp was invented by Joshua Lionel Cowen in 1899. His patent describes a device for igniting photographers’ flash powder by using dry cell batteries to heat a wire fuse. Variations and alternatives were touted from time to time and a few found a measure of success in the marketplace, especially for amateur use. In 1905, one French photographer was using intense non-explosive flashes produced by a special mechanized carbon arc lamp to photograph subjects in his studio,[4] but more portable and less expensive devices prevailed. On through the 1920s, flash photography normally meant a professional photographer sprinkling powder into the trough of a T-shaped flash lamp, holding it aloft, then triggering a brief and (usually) harmless bit of pyrotechnics.


Flashbulbs have ranged in size from the diminutive AG-1 to the massive No. 75.
Kodak Brownie Hawkeye with "Kodalite Flasholder" and Sylvania P25 blue-dot daylight-type flashbulb
The AG-1 flashbulb, introduced in 1958, used wires protruding from its base as electrical contacts; this eliminated the need for a separate metal base.

The use of flash powder in an open lamp was replaced by flashbulbs; magnesium filaments were contained in bulbs filled with oxygen gas, and electrically ignited by a contact in the camera shutter.[5] Manufactured flashbulbs were first produced commercially in Germany in 1929.[6] Such a bulb could only be used once, and was too hot to handle immediately after use, but the confinement of what would otherwise have amounted to a small explosion was an important advance. A later innovation was the coating of flashbulbs with a plastic film to maintain bulb integrity in the event of the glass shattering during the flash. A blue plastic film was introduced as an option to match the spectral quality of the flash to daylight-balanced colour film. Subsequently, the magnesium was replaced by zirconium, which produced a brighter flash.

Flashbulbs took longer to reach full brightness and burned for longer than electronic flashes. Slower shutter speeds (typically from 1/10 to 1/50 of a second) were used on cameras to ensure proper synchronization. Cameras with flash synch triggered the flashbulb a fraction of a second before opening the shutter, allowing faster shutter speeds. A flashbulb widely used during the 1960s was the Press 25, the (about 1 inch (25 mm) in diameter) flashbulb often used by newspapermen in period movies, usually attached to a press camera or a twin-lens reflex camera. Its peak light output was around a million lumens. Other flashbulbs in common use were the M-series, M-2, M-3 etc., which had a small ("miniature") metal bayonet base fused to the glass bulb. The largest flashbulb ever produced was the GE Mazda No. 75, initially developed for nighttime aerial photography during World War II.[7]

The all-glass AG-1 bulb was introduced in 1958. Eliminating both the metal base, and the multiple manufacturing steps needed to attach it to the glass bulb, cut the cost substantially compared to the larger M series bulbs. The AG-1 (along with the M2) had a faster ignition time (less delay between shutter contact and peak output), so it could be used with X synch below 1/30 of a second—while most bulbs require a shutter speed of 1/15 on X synch to keep the shutter open long enough for the bulb to ignite and burn.[8]

Flashcubes, Magicubes and Flipflash

Flashcube fitted to a Kodak Instamatic camera, showing both unused (left) and used (right) bulbs
Undersides of Flashcube (left) and Magicube (right) cartridges
"Flip flash" type cartridge

In the late 1960s Kodak improved their Instamatic camera line by replacing the individual flashbulb technology (used on early Instamatics) with the Flashcube. A flashcube was a single-use module with four flashbulbs mounted at 90° from the others in its own reflector. For use it was mounted on a swivel mechanism atop the camera that also provided an electrical connection to the shutter release and a battery inside the camera. After each exposure, the film advance mechanism also rotated the flashcube 90° to a fresh bulb. This arrangement allowed the user to take four images in rapid succession before inserting a new flashcube.

The later Magicube (or X-Cube) retained the four-bulb format, and was superficially similar to the original Flashcube. However, the Magicube did not require electrical power. Each bulb was set off by a plastic pin in the cube mount that released a cocked spring wire within the cube. This wire struck a primer tube at the base of the bulb, which contained a fulminate, which in turn ignited shredded zirconium foil in the flash. Magicubes could also be fired by inserting a thin object, such as a key or paper clip, into one of the slots in the bottom of the cube.

Flashcubes and Magicubes look similar but are not interchangeable. Cameras requiring flashcubes have a round socket and a round hole for the flashcube's pin, while those requiring Magicubes have a round shape with protruding studs and a square socket hole for the Magicube's square pin. The Magicube socket can also be seen as an X, which accounts for its alternate name, the X-Cube.

Other common flashbulb-based devices were the Flashbar and Flipflash which provided about ten flashes from a single unit. The Flipflash name derived from the fact that once half the flashes had been used up, the unit was flipped over and re-inserted to use the remainder.

Electronic flash

Electronic flash was developed after flashbulbs, and eventually superseded them as prices came down; flashbulbs are virtually obsolete. A typical electronic flash unit has electronic circuitry to charge a high-capacity capacitor to several hundred volts. When the flash is triggered by the shutter's flash synchronization contact, the capacitor is discharged almost instantaneously through a flash tube, producing a flash of very brief duration almost instantaneously (i.e., the flash duration, often around 1/1000 of a second, is shorter than most practical shutter speeds, and full brightness is reached before the shutter has time to close appreciably). Synchronization of full flash brightness with maximum shutter opening was problematic with bulbs which took an appreciable time to ignite and reach full brightness; electronic flash does not have these difficulties. Electronic flash units are sometimes called speedlights or strobes in the USA.

Simple electronic flash units are often mounted on or near the camera; many inexpensive cameras have an electronic flash unit built in.

Two professional xenon tube flashes

Some lenses have built-in (ring-)flash lights for shadow free macro photography,[9] but there are also accessory ring flashes available.

In a photographic studio, more powerful and flexible studio flash systems are used. They usually contain a modeling light, an incandescent light bulb close to the flash tube; the continuous illumination of the modeling light lets the photographer visualize the effect of the flash. A system may comprise multiple synchronised flashes for multi-source lighting.

The strength of a flash device is often indicated in terms of a guide number designed to simplify exposure setting. The energy released by larger studio flash units, such as monolights, is indicated in watt-seconds.

High speed flash

An air-gap flash is a high-voltage device that discharges a flash of light with an exceptionally short duration, often much less than one microsecond. These are commonly used by scientists or engineers for examining extremely fast-moving objects or reactions, famous for producing images of bullets tearing through light bulbs and balloons (see Harold Eugene Edgerton). An example of a process by which to create a high speed flash is exploding wire method.

A photo of a Smith & Wesson Model 686 firing, taken with a high speed air-gap flash. The photo was taken in a darkened room, with camera's shutter open and the flash was triggered by the sound of the shot using a microphone.


A camera that implements multiple flashes can be used to find depth edges or create stylized images. Such a camera has been developed by researchers at the Mitsubishi Electric Research Laboratories (MERL). Successive flashing of strategically placed flash mechanisms results in shadows along the depths of the scene. This information can be manipulated to suppress or enhance details or capture the intricate geometric features of a scene (even those hidden from the eye), to create a non-photorealistic image form. Such images could be useful in technical or medical imaging.[10]

Flash intensity

Unlike flashbulbs, the intensity of an electronic flash can be adjusted on some units. To do this, smaller flash units typically vary the capacitor discharge time, whereas larger (e.g., higher power, studio) units typically vary the capacitor charge. Color temperature can change as a result of varying the capacitor charge, thus making color corrections necessary. Due to advances in semiconductor technology, some studio units can now control intensity by varying the discharge time and thereby provide consistent color temperature.[11]

Flash intensity is typically measured in stops or in fractions (1, 1/2, 1/4, 1/8 etc.). Some monolights display an "EU Number", so that a photographer can know the difference in brightness between different flash units with different watt-second ratings. EU10.0 is defined as 6400 watt-seconds, and EU9.0 is one stop lower, i.e. 3200 watt-seconds.[12]

Flash duration

Flash duration is commonly described by two numbers that are expressed in fractions of a second:

  • t.1 is the length of time the light intensity is above 0.1 (10%) of the peak intensity
  • t.5 is the length of time the light intensity is above 0.5 (50%) of the peak intensity

For example, a single flash event might have a t.5 value of 1/1200 and t.1 of 1/450. These values determine the ability of a flash to "freeze" moving subjects in applications such as sports photography.

In cases where intensity is controlled by capacitor discharge time, t.5 and t.1 decrease with decreasing intensity. Conversely, in cases where intensity is controlled by capacitor charge, t.5 and t.1 increase with decreasing intensity due to the non-linearity of the capacitor's discharge curve.

Flash LED used in phones

High-current flash LEDs are used as flash sources in camera phones, although they are not yet at the power levels to equal xenon flash devices (that are rarely used in phones) in still cameras. The major advantages of LEDs over xenon include low voltage operation, higher efficiency, and extreme miniaturization. The LED flash can also be used for illumination of video recordings or as an autofocus assist lamp in low-light conditions.

Focal-plane-shutter synchronization

Electronic flash units have compatibility issues with focal-plane shutters. Focal-plane shutters expose using two curtains that cross the sensor. The first one opens and the second curtain follows it after a delay equal to the nominal shutter speed. A typical modern focal-plane shutter takes about 1/200 s to cross the sensor, so at exposure times shorter than this only part of the sensor is uncovered at any one time. Electronic flash can have durations as short as 50 µs, so at such short exposure times only part of the sensor is exposed. This limits the shutter speed to about 1/200 s when using flash. In the past, slow-burning single-use flash bulbs allowed the use of focal-plane shutters at maximum speed because they produced continuous light for the time taken for the exposing slit to cross the film gate. If these are found they cannot be used on modern cameras because the bulb must be fired *before* the first shutter curtain begins to move (M-sync); the X-sync used for electronic flash normally fires only when the first shutter curtain reaches the end of its travel.

High-end flash units address this problem by offering a mode, typically called FP sync or HSS (High Speed Sync), which fires the flash tube multiple times during the time the slit traverses the sensor. Such units require communication with the camera and are thus dedicated to a particular camera make. The multiple flashes result in a significant decrease in guide number, since each is only a part of the total flash power, but it's all that illuminates any particular part of the sensor. In general, if s is the shutter speed, and t is the shutter traverse time, the guide number reduces by s / t. For example, if the guide number is 100, and the shutter traverse time is 5 ms (a shutter speed of 1/200s), and the shutter speed is set to 1/2000 s (0.5 ms), the guide number reduces by a factor of 0.5 / 5, or about 3.16, so the resultant guide number at this speed would be about 32.

Current (2010) flash units frequently have much lower guide numbers in HSS mode than in normal modes, even at speeds below the shutter traverse time. For example, the Mecablitz 58 AF-1 digital flash unit has a guide number of 58 in normal operation, but only 20 in HSS mode, even at low speeds.


Image exposed without additional lighting (left) and with fill flash (right)
Lighting produced by direct flash (left) and bounced flash (right)

As well as dedicated studio use, flash may be used as the main light source where ambient light is inadequate, or as a supplementary source in more complex lighting situations. Basic flash lighting produces a hard, frontal light unless modified in some way.[13] Several techniques are used to soften light from the flash or provide other effects.

  • Softboxes, diffusers that cover the flash lamp, scatter direct light and reduce its harshness.
  • Reflectors, including umbrellas, flat-white backgrounds, drapes and reflector cards are commonly used for this purpose (even with small hand-held flash units).
  • Bounce flash is a related technique in which flash is directed onto a reflective surface, for example a white ceiling or a flash umbrella, which then reflects light onto the subject. It can be used as fill-flash or, if used indoors, as ambient lighting for the whole scene. Bouncing creates softer, less artificial-looking illumination than direct flash, often reducing overall contrast and expanding shadow and highlight detail, and typically requires more flash power than direct lighting.[13] Part of the bounced light can be also aimed directly on the subject by "bounce cards" attached to the flash unit which increase the efficiency of the flash and illuminate shadows cast by light coming from the ceiling. It's also possible to use one's own palm for that purpose, resulting in warmer tones on the picture, as well as eliminating the need to carry additional accessories.
  • Fill flash or "fill-in flash" describes flash used to supplement ambient light in order to illuminate a subject close to the camera that would otherwise be in shade relative to the rest of the scene. The flash unit is set to expose the subject correctly at a given aperture, while shutter speed is calculated to correctly expose for the background or ambient light at that aperture setting. Secondary or slave flash units may be synchronized to the master unit to provide light from additional directions. The slave units are electrically triggered by the light from the master flash. Many small flashes and studio monolights have optical slaves built in. Wireless radio transmitters, such as PocketWizards, allow the receiver unit to be around a corner, or at a distance too far to trigger using an optical sync.
  • Strobe: Some high end units can be set to flash a specified number of times at a specified frequency. This allows action to be frozen multiple times in a single exposure.[14]
  • Colored gels can also be used to change the color of the flash. Correction gels are commonly used, so that the light of the flash is the same as tungsten lights (using a CTO gel) or fluorescent lights.


The distance limitation as seen when taking picture of the wooden floor
The same picture taken with incandescent ambient light, using a longer exposure and a higher ISO speed setting. The distance is no longer restricted, but the colors are unnatural because of a lack of color temperature compensation, and the picture may suffer from more grain or noise.
  • Using on-camera flash will give a very harsh light, which results in a loss of shadows in the image, because the only lightsource is in practically the same place as the camera. Balancing the flash power and ambient lighting or using off-camera flash can help overcome these issues. Using an umbrella or softbox (the flash will have to be off-camera for this) makes softer shadows.
  • A typical problem with cameras using built-in flash units is the low intensity of the flash; the level of light produced will often not suffice for good pictures at distances of over 3 metres (10 ft) or so. Dark, murky pictures with excessive image noise or "grain" will result. In order to get good flash pictures with simple cameras, it is important not to exceed the recommended distance for flash pictures. Larger flashes, especially studio units and monoblocks, have sufficient power for larger distances, even through an umbrella, and can even be used against sunlight, at short distances.
  • The "red-eye effect" is another problem with on camera and ring flash units. Since the retina of the human eye reflects red light straight back in the direction it came from, pictures taken from straight in front of a face often exhibit this effect. It can be somewhat reduced by using the "red eye reduction" found on many cameras (a pre-flash that makes the subject's irises contract). However, very good results can be obtained only with a flash unit that is separated from the camera, sufficiently far from the optical axis, or by using bounce flash, where the flash head is angled to bounce light off a wall, ceiling or reflector.
  • On some cameras the flash exposure measuring logic fires a pre-flash very quickly before the real flash. In some camera/people combinations this will lead to shut eyes in every picture taken. The blink response time seems to be around 1/10 of a second. If the exposure flash is fired at approximately this interval after the TTL measuring flash, people will be squinting or have their eyes shut. One solution may be the FEL (flash exposure lock) offered on some more expensive cameras, which allows the photographer to fire the measuring flash at some earlier time, long (many seconds) before taking the real picture. Unfortunately many camera manufacturers do not make the TTL pre-flash interval configurable.
  • Flash distracts people, limiting the number of pictures that can be taken without irritating them.
  • Photographing with flash may not be permitted in some museums even after purchasing a permit for taking pictures.
  • Flash equipment may take some time to set up, and like any grip equipment, may need to be carefully secured, especially if hanging overhead, so it does not fall on anyone. A small breeze can easily topple a flash with an umbrella on a lightstand if it is not tied down or sandbagged. Larger equipment (e.g. monoblocks) will need a supply of AC power.


See also


  1. ^ McNeil, Ian (2002). An Encyclopaedia of the History of Technology. Routledge. pp. 113–114. Retrieved 14 August 2014. 
  2. ^ Chapman, James Gardiner (1934). Manchester and Photography. Manchester: Palatine Press. pp. 17–18. 
  3. ^ Jayon, Bill. "Dangers in the Dark" (PDF). Retrieved 25 July 2014. 
  4. ^ "Taking instantaneous photographs by electric light". Popular Mechanics 7 (2): 233. February 1905. 
  5. ^ Solbert, Oscar N.; Newhall, Beaumont; Card, James G., eds. (November 1953). "The First Flash Bulb" (PDF). Image, Journal of Photography of George Eastman House (Rochester, N.Y.: International Museum of Photography at George Eastman House Inc.) 2 (6): 34. Retrieved 26 June 2014. 
  6. ^ Wightman, Dr. Eugene P. "Photoflash 62 Years Ago" (PDF). Image, Journal of Photography of George Eastman House (Rochester, N.Y.: International Museum of Photography at George Eastman House Inc.) IV (7): 49–50. Retrieved 4 August 2014. 
  7. ^ Anderson, Christopher. "Photoflash bulbs". Darklight Imagery. Retrieved 23 October 2014. The largest flashbulb, the mammoth GE Mazda Type 75, was initially developed to be used as a source of light for night time aerial photography during world war II. The Mazda 75 measured over eight inches long and had a girth of 14 inches! 
  8. ^ "AG-1 Flashbulb History". Retrieved 5 July 2013.
  9. ^ Medical Nikkor LensFor example, the Nikon
  10. ^ Nicholls, Kyle. "Non-photorealistic Camera". Retrieved 28 December 2011. 
  11. ^ "Studio Flash Explained: Flash Duration". Paul C. Buff, Inc. Retrieved 5 July 2013. 
  12. ^ "Einstein – User Manual/Operation Instructions" (PDF). Paul C. Buff, Inc. p. 13. Retrieved 5 July 2013. 
  13. ^ a b Langford, Michael (2000). Basic Photography (7th ed.). Focal Press/Butterworth Heinemann. p. 117.  
  14. ^ "Stobe Tips". Addendum. June 12, 2010. 

External links

  • "Flash – Let there be light!". Roie Galitz.
  • "Flash Photography with Canon EOS Cameras - Part I". 12 December 2010.
  • "A Minolta/Sony Alpha Flash Compendium". Fotografie.
  • "Photographic Cheat Sheet" PDF (87.2 KB). Gordon McKinney.
  • List of flashbulbs models. David L. Brittain.
  • Flash comparison chart. Bart Zieba Photography.
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from World Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.